Ferroli OMNIA M 3.2 22T Manual De Instalación Y Del Propietario página 128

10.7.1 DHW MODE SETTING
DHW = domestic hot water
Go to > FOR SERVICEMAN> 1.DHW MODE SETTING.
Press . The following pages will be displayed:
DISINFECT
D PUMP DISINFECT
10.7.2 COOL MODE SETTING
Go to > FOR SERVICEMAN> 2.COOL MODE SETTING.
Press .
The following pages will be displayed:
128
EN
OMNIA M 3.2
10.7.3 HEAT MODE SETTING
Go to >FOR SERVICEMAN> 3.HEAT MODE SETTING.
Press . The following pages will be displayed:
10.7.4 AUTO MODE SETTING
Go to > FOR SERVICEMAN> 4.AUTO MODE SETTING.
Press , the following page will be displayed.
10.7.5 TEMP. TYPE SETTING
The TEMP. TYPE SETTING is used for selecting whether
the water flow temperature or room temperature is used to
control the ON/OFF of the heat pump.
When ROOM TEMP, is enabled, the target water flow
temperature will be calculated from climate-related curves
(refer to 10.1 "Climate related curves").
How to enter the TEMP. TYPE SETTING
Go to > FOR SERVICEMAN> 5.TEMP. TYPE SETTING.
Press . The following page will be displayed:
Cod. 3QE47660 - Rev. 00 - 02/2022
22T÷30T