Rotary SPMA32-X Manual De Operaciones Y Mantenimiento página 55

INDEX
CH. 2 INTRODUCTION
2.1 DESCRIPTION OF LIFT
• Product name: CAR LIFT
• Product description: Electromechanical lift with two posts and telescopic arms.
Chassis-level lift
2.2 INTENDED USE
The product is intended for lifting motor vehicles in accordance with current legislation, Machinery Directive 2006/42/EC; the load
capacity is as indicated on the serial number plate.
The lift is designed for indoor use not subject to the action of wind.
Vehicles having the following characteristics may be lifted:
- the weight must not exceed the lift capacity (see fig. A) as required by the UNI EN 1493:2010 standard
- the lift complies with the 2/5 - 3/5 load distribution and reversibility condition expressed by 1493:2010 (fig. B).
- minimum distance of pickup points: mm.1000 (Fig. C).
For lower distance values, the lift capacity will be reduced. In this case or in other cases not covered by this manual, the manufacturer
should be contacted.
P1
SPMA32-X ROT.SP32X.198549
SPMA32-XP ROT.SP32X.198723
SPMA32-XER ROT.SP32X.199379
SPMA32-X ROT.SP32X.198549
SPMA32-XP ROT.SP32X.198723
SPMA32-XER ROT.SP32X.199379
SPMA35-X ROT.SP35X.199263
SPMA35-XE ROT.SP35X.198990
SPMA35-XEV ROT.SP35X.199416
P2
SPMA35-X
Kg
SPMA35-XE
SPMA35-XEV ROT.SP35X.199416
3200
Fig. B
SPMA32 - SPMA35
P2
ROT.SP35X.199263
Kg
ROT.SP35X.198990
3500
Min. 1000 mm
P1
Fig. A
Fig. C
0473-M004-0 EN_3