Descargar Imprimir esta página

Alpha Smartware EC-52010-06 Instrucciones De Instalación página 19

Ocultar thumbs Ver también para EC-52010-06:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 82
1 About these instructions
This document must be read completely and thoroughly before the device is put into operation. The document must be kept
and to be handed over to future users.
1.1 Symbols
The following symbols are used in this manual:
Identifies important or useful information
CAUTION
Description of the nature and source of the risk
Procedure for prevention.
ü Preconditions
1. Action step
ð Interim result
ð Result
– List without fixed order
2 Security
All safety notes in this document must be observed in order to avoid accidents with personal damage or property damage.
No liability is assumed for personal damage and property damage caused by improper use or non-observance of the safety
notes. In such cases any warranty claim is invalid. There is no liability for consequential damages.
WARNING
Electrical voltage! Danger to life!
a) Switch off the mains voltage before mounting and installation.
b) Secure against restarting.
2.1 Intended use
The device is part of the Alpha Smart system and is used for the following purposes:
– for installation in environments of residential use
– Setup of a single room control with up to 10 zones (depending on the type used) for water-guided floor heating systems
– Connection and supply of a pump and thermal actuators
Any other usage, change, and modifications are strictly prohibited. Usage other than the intended use leads to dangers for
which the manufacturer is not liable, and to an exclusion of warranty and liability.
Further system information on Alpha Smartware can be found under
https://www.alphasmartware.de .
About these instructions
DEU
ENG
FRA
NDL
ITA
ESP
DAN
NOR
FIN
SWE
POL
RUS
19

Publicidad

loading

Este manual también es adecuado para:

Ec-52010-10