Alpha Smartware EC-52010-06 Instrucciones De Instalación página 28

Commissioning
A
1.
DEU
ENG
FRA
NDL
ITA
ESP
DAN
1a
NOR
FIN
SWE
5.
1b
POL
RUS
Long press means pressing >3 sec / Short press means pressing <1 sec
1a) Teaching room control units to heating zones
1. Press and hold the button Pairing [B] to activate the pairing mode: The LED Pairing flashes slowly.
ð If instead the Error LED flashes red, all heating zones are already occupied.
ð The LEDs of all already coupled heating zones light up permanently
ð The LEDs of all heating zones available for pairing flash slowly
ð Press and hold the Clear button [A] to exit the pairing mode.
2. Briefly press the Pairing button [B] repeatedly until the desired heating zone is selected.
ð The LED of the selected heating zone flashes quickly
3. Briefly press the Clear [A] button to confirm the previously selected heating zone for the pairing process: The LED of the
selected heating zone lights up permanently
ð To assign additional heating zones: Repeat steps 2 and 3.
4. Press and hold the Pairing [B] button to start the pairing process for the previously selected heating zones: The LED Pair-
ing flashes quickly
28
B
> 3 sec
B
freq. 1 on/off
3.
< 1 sec
A
5.
< 1 sec
6.
> 3 sec < 1 sec
Freq. 1 on/off
on
0
off
on/off freq.
Freq. 2 on/off
2.
< 1 sec
B
2.
B < 1 sec
HZ1...n
3.
< 1 sec
A
6.
< 1 sec
B
7.
< 1 sec
B
1 2 3 4
freq. 2 on/off
4.
> 3 sec
B
7.
<1 sec
8.
<1 sec
5
sec sec.
sec