In-Car Connections
In-Car Connections
Auto pairing
When <Auto Pairing> is set to [ON], Bluetooth
devices are automatically paired.
• For iPhone with Apple CarPlay and Android device
with Android Auto: When the device is connected
via USB, it is automatically paired regardless of this
setting.
Automatic Wi-Fi connections
This unit is equipped with the Wi-Fi function.
• You can turn on or off the Wi-Fi function on the
<Wireless/HDMI SETUP> settings. To use the
Wi-Fi function, be sure [Wi-Fi] is selected.
Once your iPhone or Android device is paired
successfully with Bluetooth or connected with
USB for Apple CarPlay or for Android Auto, it is
automatically connected with Wi-Fi. And from the
next time on, it is automatically connected through
Wi-Fi.
• Turn on the Bluetooth and Wi-Fi functions on your
iPhone or Android device.
• It is necessary to connect the GPS antenna in order
to use wireless Apple CarPlay.
8
ENGLISH
Pairing a Bluetooth device using SSP
(for Bluetooth 2.1)
1
Display the Home screen.
2
Display the <Device List> screen.
From the Home screen (page 4), touch as
follows:
Then, on the <Setup> screen, touch as follows:
[System] → <Connections SETUP> : [Enter]
On the <Connections SETUP> screen, touch as
follows:
<Device List> : [Enter]
• You can also use the pop-up function menu to
display the <Device List> screen (page 12).
3
Make the unit ready for pairing.
On the <Device List> screen:
Please open Bluetooth settings on your device and
select the device name below
DMXXXXXXX
Cancel
4
Search for the unit ("DMX809S" or
"DMX8709S") from your Bluetooth device.
5
Confirm the request both on the device
and the unit.
On the device: Confirmation method varies for the
device.
On the unit:
BT Pairing request
To perform BT Pairing
Please confirm the device display
DMXXXXXX (device name)
012345 (PIN code)
Pair
Cancel
Pairing is complete.
To reject the request: Touch [Cancel].
6
Register the usage of the Bluetooth
device.
• See "Registering the usage of the devices" on
page 10.