Publicidad
Idiomas disponibles
Idiomas disponibles
Component Names and Basic Operations
Component Names and Basic Operations
Putting the unit in standby
1
Display the source/option selection
screen.
From the Home screen (page 4), touch as
follows:
2
Put the unit in standby.
On the source/option selection screen (page 11):
Turning off the screen
On the monitor panel
To turn on the screen: Press
the DISP OFF button on the
monitor panel or touch the
screen.
(Hold)
On the pop-up menu
To turn on the screen: Touch the screen.
Adjusting the volume
You can adjust the volume (00 to 40)
J
by pressing VOL
pressing VOL
K
to decrease.
• When volume level is below 15,
J
holding VOL
volume continuously to level 15.
Attenuating the sound
On the source control screen:
To cancel attenuation:
Initial settings
When you power on the unit for the first time or
to increase and
initialized, the <Initial Setup> screen appears.
Perform the initial settings.
increases the
Initial Setup
Demonstration
Language
Front Camera
Rear Camera
User Customize
Viewing Angle
Once completed, Home screen appears.
<Demonstration>
• ON (Initial): Activates the display demonstration.
• OFF: Deactivates the display demonstration.
<Language>
Select the text language used for on-screen
information.
• English (Initial)/Español/Français
• GUI Language (Local (the language selected above)
(Initial)/English): Selects the language used for
displaying operation keys and menu items.
<Front Camera>
Make the settings to display the picture from the
connected front view camera.
ON
OFF
English
Enter
Enter
Enter
Enter
Enter
Finish
ENGLISH
5
Publicidad
