TECNOMOTOR 810 Manual Operativo página 104

Never use compressed air on the analyser fittings to clean
The emission analysis of 2 and 4-stroke vehicles will cause the filtering system
to become dirtier than during the analysis of the vehicles. For this reason, it is
recommended:
o to replace worn filters.
o to clean the sampling probes with compressed air at regular intervals.
Technical Specifications
9
the internal pneumatic components, as the pressure
applied to the internal circuit may cause the pneumatic
23 x 34 x 22.5 cm
(with internal battery) less than 15 Kg
1.126 Kg
220/110 V - 50/60 Hz 30 W
5° ÷ 40°C
-20 ÷ 60°C
850 hPa ÷ 1025 hPa
0% RH ÷ 95% RH
3 min.
Electronic and automatic through solenoid valve
0 ÷ 150°C Res. 1°C
0 ÷ 10% Vol. Res. 0.01% Vol.
0 ÷ 20% Vol. Res. 0.1% Vol.
0 ÷ 20000 ppm Vol. (optional) Res. 1 ppm Vol.
0 ÷ 21% Vol. Res. 0.01% Vol.
0 ÷ 2 Res. 0.001
0 ÷ 5000 ppm Vol. (optional) Res. 1 ppm Vol.
less than 15 Kg
WARNING!
circuit to break.
50