Publicidad
Idiomas disponibles
Idiomas disponibles
2.2 Using the keys
Function key to access
the setup menu and to
activate the numeric, or
upper case, lower case
writing mode.
2.3 Connecting the gas probe
The gas analysis probe consists of a
metal nozzle to collect the analysis
gas and must be inserted inside the
exhaust pipe of the vehicle; the other
end must be inserted inside the inlet
of the analyser.
the gas inlet of the instrument is
located on the condensate separator.
Connect the gas sampling probe as
shown in the figure.
6
Arrow keys to move
through menus
Alphanumeric keys for
data entry
Publicidad
