Descargar Imprimir esta página

Whirlpool W6 OS4 4S1 H BL Guía Rápida página 14

Ocultar thumbs Ver también para W6 OS4 4S1 H BL:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

TROUBLESHOOTING
Problem
The oven is not working.
The display shows the letter "F"
followed by a number or letter.
The oven does not heat up.
The light switches off.
The home power goes off.
Policies, standard documentation and additional product information can be found by:
Visiting our website
Using QR Code
Alternatively,
contacting our After-sales Service, please state the codes provided on your product's identification
plate.
14
Possible cause
Power cut.
Disconnection from the mains.
Oven failure.
When "DEMO" is "On" all
commands are active and menus
available but the oven doesn't
heat up.
DEMO appears on display every
60 seconds.
"ECO" mode is "On".
Power setting wrong.
docs . whirlpool . eu
contact our After-sales Service
Solution
Check for the presence of mains electrical power and whether
the oven is connected to the electricity supply.
Turn off the oven and restart it to see if the fault persists.
Turn off the oven and restart it to see if the problem persists.
Try to perform the "FACTORY RESET" from, selectable from
"SETTINGS".
Contact you nearest Client After-sales Service Centre and state
the number following the letter "F".
Acceess "DEMO" from "SETTINGS" and select "Off".
Acceess "ECO" from "SETTINGS" and select "Off".
Verify if your domestic network has at least a rating of more
than 3 kW. If no, decrease the power to 13 Ampere. Access
"POWER" from "SETTINGS" and select "LOW".
(See phone number in the warranty booklet). When
Model: xxxXXXXxx
XXXXXXXXXXXXXX

Publicidad

loading

Este manual también es adecuado para:

W6 os4 4s1 h