Whirlpool W6 OS4 4S1 H BL Guía Rápida página 5

WEIGHT / HEIGHT / PIZZA (ROUND-TRAY-LAYERS)
KILOGRAMS
To set the function correctly, follow the indications on
the display: when prompted, press
required value then press
DONENESS / BROWNING
In some 6 Sense functions it is possible to adjust the
th
doneness level.
DONENESS
When prompted, press
between rare (-1) and well done (+1). Press
confirm and start the function.
In the same way, where allowed, in some 6
functions, it's possible to adjust the browning level
between low (-1) and high (1).
. COOKING WITH STEAM
By selecting the "Forced Air + Steam" or one of the
several 6 Sense dedicated recipes it is possible cook
th
any kind of food thanks to the use of the steam.
Steam spreads more quickly and more evenly
through food compared to just the hot air typical of
Conventional Functions: this reduce cooking times,
locking in food's precious nutrients and ensuring you
obtain excellent, truly delicious results with all your
recipes.
Through the complete duration of the steam cooking
the door must be kept closed.
For proceed with steam cooking, it will be necessary fill
the tank located inside the oven using the drawer on
the control panel.
When requested on the display with "ADD WATER" or
"FILL DRAWER" indications, open the drawer by pressing
it lightly.
Pour in slowly some drinking water until the display
shows "TANK FULL". Maximum tank capacity is approx.
1.5 litre.
It will be necessary to add water only when the tank
won't be filled enough to complete the cooking.
Avoid to fill the tank when the oven is switched off or
up to it will requested from the display.
3. START THE FUNCTION
At any time, if the default values are those desired or
once you have applied the settings you require, press
to activate the function.
or to set the
to confirm.
or to select the desired level
or
Sense
th
During the delay phase, by pressing
start immediately the function.
Please note: Once a function has been selected, the display
will recommend the most suitable level for each function.
At any time you can stop the function that has been activated
by pressing .
If the oven is hot and the function requires a specific
maximum temperature, a message will shown on the
display. Press
a different function or wait for a complete cooling.
4. PREHEATING
Some functions have an oven preheating phase: Once
the function has started, the display indicates that the
preheating phase has been activated.
to
PREHEATING
Once this phase has finished, an audible signal will
sound and the display will indicate that the oven has
reached the set temperature, requiring to "ADD FOOD".
At this point, open the door, place the food in the oven,
close the door and start cooking.
Please note: Placing the food in the oven before preheating
has finished may have an adverse effect on the final cooking
result. Opening the door during the preheating phase will
stop pause it.
The cooking time does not include a preheating phase.
You can always change the temperature you want the
oven to reach using
5. PAUSE COOKING / TURN OR CHECK FOOD
By opening the door, the cooking will be temporarily
paused through deactivating heating elements.
To resume the cooking, close the door.
Some 6 Sense functions will require the food to be
th
turned during cooking.
TURN FOOD
An audible signal will sound and the display the display
shows the action to be done. Open the door, do the
action prompted by the display and close the door and
resume cooking.
In the same way, at 10% of time before the end of
cooking, the oven prompts you to check the food.
CHECK ON FOOD
An audible signal will sound and the displays shows the
action must to be done. Check the food, close the door
and resume cooking.
Please note: Press
action is done after a certain time the oven will continue the
cooking.
to return to previous screen and select
or .
to skip these actions. Otherwise, if no
EN
the oven will
5