STERWINS EGT2-25.4 Manual Del Usuario página 174

• Switch the product off when the trimming spool is blocked. Disconnect the
FR
power source and remove the blockage. Inspect the spool for damage before
using the product again.
• Keep supply and extension cords away from cutting parts.
ES
2.10 SERVICE
A) Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power
PT
tool is maintained.
2.11 RESIDUAL RISKS
IT
• Familiarise yourself with the use of this product by means of this instruction
manual. Memorise the safety directions and follow them to the letter. This will
help to prevent risks and hazards. Always be alert when using this product, so
EL
that you can recognise and handle risks early. Fast intervention can prevent
serious injury and damage to property. Switch off and disconnect from the
Power source if there are malfunctions.
• Even if all instructions are strictly followed, there are still some factors that
PL
could lead to hazards, such as :
- Thrown out pieces of the work piece.
- Vibration injuries : use designated handles and try to reduce working time
and exposure.
RU
- Injuries caused by noise : wear ear protection and reduce working time and
exposure.
- Inhalation of dust and particles.
- Wear eye protection at all times.
KZ
If you experience any of these factors while using the machine, stop the
machine consult your doctor immediately
2.12 TECHNICAL DATA
UA
RO
EN
Net weight (without packaging)(Kg)
Guaranteed sound power level (dB(A))
measured sound press level at the operator
Measured sound power level (dB(A))
Vibration level (K=1.5m/s
Model
Rated voltage (V)
Rated power (w)
Frequency (Hz)
Cutting width (cm)
Cutting system
Line size (mm)
position
2 )(m/s
No-load speed (min -1 )
• WARNING! The cutting wire can be ejected! Risk of injury to bystandters.
• Do not cut damp or wet grass.
• Do not overload your tool.
• Do not use blade with this product!
B) Have the product checked by a qualified professional and repaired, if
necessary, before you operate it again.
C) Never replace the non-metallic cutting means with metallic cutting
means.
• Injuries may be caused or aggravated by prolonged use of a tool. When using
any tool for prolonged periods, ensure you take regular breaks.
• Prolonged use of the product exposes the user to vibrations that can cause
a range of conditions collectively known as hand-arm vibration syndrome
(HAVS) e.g. fingers going white; as well as specific diseases such as carpal
tunnel syndrome.
• To reduce this risk when using the product, always wear protective gloves
and keep your hands warm.
L =82,2dB(A), K
PA
L =94,1 dB(A), K
WA
2 )
174
EGT2-25.4
220 - 230
350
50
25
Line
1,6
1,75
96
=2 ,50dB(A)
PA
=1,64dB(A)
WA
5,807
10500±10%