GRAPHITE 58G011 Traducción Del Manual Original página 9

GWARANCJA I SERWIS
Warunki gwarancji oraz opis postępowania w przypadku reklamacji
zawarte są w załączonej Karcie Gwarancyjnej.
Serwis Centralny GTX Service Sp. z o.o. Sp.k.
ul. Pograniczna 2/4 tel. +48 22 364 53 50
02-285 Warszawa e-mail bok@gtxservice.com
Sieć Punktów Serwisowych
pogwarancyjnych dostępna na platformie internetowej gtxservice.
pl
Zeskanuj QR kod i wejdź na gtxservice.pl
TRANSLATION OF
THE ORIGINAL INSTRUCTIONS
CORDLESS BLADE SAWING MACHINE
(JIGSAW)
58G011
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL
CAREFULLY AND KEEP IT FOR FUTURE REFERENCE.
DETAILED SAFETY REGULATIONS
SPECIFIC REGULATIONS REGARDING SAFE USE OF THE
JIGSAW
• When carrying out tasks when work tool can hit hidden electric
wires, hold the tool by insulated areas of the handle Contact with
power supply line may transfer its voltage to metal parts of the power
tool and cause electric shock.
• Keep hands at safe distance from the cutting area Do not put
them under processed piece Contact with blade may cause injury.
• Switch off the jigsaw after work Remove blade from processed
piece only when it is at standstill This way you can avoid kick back
and it is possible to safely put away the power tool.
• Use only undamaged blades in good technical condition Bent,
blunt blades may break, additionally may affect cutting line and
contribute to or cause kick back.
• Dust of certain wood and metal types may be dangerous to
health and cause allergic reactions, respiratory tract illness or be
carcinogenic
- Use dust masks when cutting to protect your respiratory system
against produced dust.
- Use dust extraction system when cutting wood.
- Always provide good ventilation of your workplace.
• Do not cut water system pipes with the jigsaw Cutting a pipe may
cause material damages or electric shock.
• Carefully check the processed material before cutting to eliminate
possibility of cutting nails, bolts, or other hard objects.
• Do not cut objects thicker than allowed in technical specification for
a given material.
• Hold the jigsaw in a closed hand.
• Ensure the jigsaw does not have contact with the material before
pressing the switch.
• Do not touch moving parts with your hand.
• Do not put away the jigsaw until it stops moving. Do not switch the
jigsaw on when not holding it.
• Do not touch the blade or processed material immediately after
the work has been finished Those elements may be hot and may
do napraw gwarancyjnych
cause burns.
• When you see unusual behaviour of the tool or hear strange noises,
immediately switch off the tool and remove the plug from mains
socket.
• To ensure proper cooling keep ventilation holes in the jigsaw body
uncovered.
CORRECT OPERATION AND USE OF BATTERIES
i
• Battery charging process should be supervised by the user.
• Avoid charging the battery in temperature lower than 0°C.
• Use only the charger recommended by the manufacturer Using
charger designed for other type of battery brings the risk of fire.
• When the battery is not in use, store it away from metal objects
such as paper clips, coins, keys, nails, screws or any other small
metal objects that can short-circuit the battery connectors Short-
circuit of battery connectors may cause burns or fire.
• In case of battery damage and/or improper use it may produce
gas Ventilate room and seek medical attention in case of medical
symptoms Gas can damage respiratory tract.
• In extreme conditions liquid may leak out of the battery The
liquid coming out of the battery may cause irritations or burns
When a leak is found, follow the below procedure:
- Carefully wipe the liquid with a cloth. Avoid contact of the liquid with
skin and eyes.
- In case the liquid gets onto skin, immediately wash the spot
abundantly with clean water, you can also neutralize the liquid with a
mild acid, e.g. lemon juice or vinegar.
- When the liquid gets into eyes, wash it immediately with a lot of clean
water for at least 10 minutes. Seek medical advice.
• Do not use damaged or modified battery Damaged or modified
batteries may behave unpredictably, causing fire, explosion or risk of
injuries.
• Do not expose the battery to humidity or water
• Always keep the battery away from sources of heat. Do not leave
the battery for a long time in high temperature (in direct sunlight,
in proximity of heaters and wherever the temperature exceeds 50°C).
• Do not expose the battery to fire or excessive temperature
Exposure to fire or temperature above 130°C may cause explosion.
CAUTION! Temperature of 130°C can be also defined as 265°F.
• Observe all charging instructions Do not charge the battery in
temperature outside of range defined in the rating data table
from the instruction manual Incorrect charging or charging in
temperature outside of defined range may damage the battery and
increase the risk of fire.
BATTERY REPAIRS
• Do not repair damaged batteries Battery can be repaired only by the
manufacturer or in an authorised workshop.
• When disposing of the worn out battery, take it to a service point
where you can utilize such dangerous wastes
SAFETY REGULATIONS FOR THE CHARGER
• Do not expose the charger to humidity or water Ingress of water
into the charger increases risk of electric shock. Use the charger only in
dry rooms.
• Disconnect the charger from power supply before starting any
maintenance or cleaning.
• Do not use the charger when placed on flammable surface (e g
paper, textiles) or in proximity of flammable substance Greater
charger temperature when charging increases risk of fire.
• Check condition of the charger, cable and plug before each use
Do not use the charger if any damage is found Do not try to
disassemble the charger All repairs should be made at an authorized
service workshop. Improper charger assembly may cause electric shock
or fire.
• Children or persons who are physically, emotionally or mentally
disabled and other persons, whose experience or knowledge is
insufficient to use the charger while following all safety rules should
not use the charger without supervision of person responsible for
their safety. Otherwise there is a risk of improper use and injuries in
consequence.
• When the charger is not in use, it should be disconnected from
the mains network
• Observe all charging instructions Do not charge the battery in
temperature outside of range defined in the rating data table
from the instruction manual Incorrect charging or charging in
9