ieGeek ig20 Manual Del Usuario página 20

A� Introduction of HiP2P interface
1. Preview: preview online cameras.
2. Automatically add devices: add devices under the same router
automatically.
3. Local playback: view the downloaded videos and videos stored
in hard disks.
4. Remote playback: view the videos stored in SD card.
5. Config: set the camera settings such as add the camera, server
address and snapshots, etc.
6. Logs: you can check the camera active in here.
7. Log out user: log out the current user.
8. Exit.
B� How to connect the camera
1. Click "config".
2. Click "device management".
16