ieGeek ig20 Manual Del Usuario página 9

2. If your camera can't connect well but your network is good,
please take out your micro SD card and try to reconnect it.
Maybe the micro SD card is incompatible.
3. If there are excessive devices connect to your Wi-Fi, it will cause
the IP address conflict so that it will fail to connect to Wi-Fi.
Wired Connection
1. Connect the camera into the router via an Ethernet cable and
then plug the power supply adapter in.
2. Open CamHipro and click 'Add Device' - 'IP camera' - 'New
device' -'Connected network cable' - choose the camera UID
you want to connect - enter initial password 'admin' - 'Add to'.
5