ieGeek ig20 Manual Del Usuario página 22

C� Parameter settings
1. Video: set bit rate, frame rate, stream etc.
2. Image: set IR LED, image mode etc.
3. Audio: the input&output voice. (Just can set the two-way audio
cameras.)
4. Alarm setting: including motion detection, sound alarm, email
alarm, FTP storage etc.
5. Network: get the IP address, RTSP port and ONVIF port of the
camera.
6. SD card: check your micro SD card storage and set the plan
recording time. (The green areas are the working time.)
7. Timed capture: save pictures to micro SD card or RTSP.
8. Login information: change the camera password.
9. System: view the camera information and set the time zone.
10. Wi-Fi: connect the camera to Wi-Fi and test the Wi-Fi signal.
11. Motion detection: set the detection zones and sensitivity.
18