Medline MDS7001B Manual Del Usuario página 15

2. Correctly place cuff on arm, then press
"User 1" or "User 2" to begin a measurement.
LCD
Display
Display & save Data Transmission
the results
The data transmission If the data
will proceed. transmission
succeeds, the
Bluetooth symbol
will appear then the
screen will go dark.
26
Adjust to Inflating &
Zero Point
Measuring
Data Transmission
Succeeds Fails
If the data
transmission fails,
the Bluetooth
symbol will not
appear then the
screen will go dark.
DATA MANAGEMENT
Recalling Saved Measurements
1. When the monitor is on, even if the display is dark, please press
the "Query" button to show the average value of the latest three
records. If the memory holds less than three measurements,
it will display the latest record first.
2. Press the "Query" button again to view
each individual record. The unit can store
up to 60 measurements, showing the
most recent ones first. Once there are
more than 60 readings, the oldest ones
will be deleted first.
NOTE: Deleted measurements will still be available
on the Medline
The date and time of the record will be shown alternately.
Health App.
3. Press "User 1" or
The current No. is No 1.
"User 2" to view
saved measurements for either user.
Deleting Saved Measurements
1. Press and hold the "Query" button
for 3 seconds when the monitor is
in the memory recall mode.
The "dEL all + User ID" will
flash on the display.
2. Press "Query" to confirm deleting and "dEL donE+User ID" will
be displayed on the screen. The monitor will then go into sleep
mode, it will not turn off.
NOTE: To exit out of the delete mode,
please press the "User 1" or "User 2" button.
The corresponding The corresponding
date is January 2nd. time is 8:00.
27