BEFORE USING FOR THE FIRST TIME
1. Carefully unpack the Double Rotating Waffle Maker and remove all packaging and materials.
2. Set the Double Rotating Waffle Maker on a dry, clean and flat surface.
3. Wipe outer surfaces with a slightly damp, soft cloth or sponge.
4. Press the top plate release button and lift the top cooking plate to expose the upper waffle
compartment #1 (see fig#2). Wipe the cooking plates with a damp cloth to remove all dust,
and then dry.
5. Lower the top cooking plate to close the Double Rotating Waffle Maker and rotate the handle
(in the direction of the arrow) 180° to the bottom side.
6. Press the top plate release button and lift the top cooking plate to expose the lower waffle
compartment #2 (see fig#3). Wipe the cooking plates with a damp cloth to remove all dust,
and then dry. Close the lid and rotate the unit 180° counter-clockwise to the top side.
Figure 2
7. CAUTION: Take care to prevent water from running into the appliance. NEVER IMMERSE THE
DOUBLE ROTATING WAFFLE MAKER BODY IN WATER OR ANY OTHER LIQUIDS!
8. NOTE: When your Double Rotating Waffle Maker is heated for the first time, it may emit slight
smoke or odor. This is normal and should disappear after one or two uses. This does not affect
the safety of the appliance. However, as it may affect the flavor of the first waffles prepared in the
Double Rotating Waffle Maker, it is recommended that these be discarded.
9. Keep the Waffle Maker closed until use.
OPERATING INSTRUCTIONS
IMPORTANT: Before operating your Double Rotating Waffle Maker, make sure the Drip Tray is in
place in the base of the Waffle Maker.
1. Plug Waffle Maker into a 120V AC electrical outlet.
2. Press the POWER button to ON. The POWER button will illuminate and remain lit during use. An
audible beep can be heard and both white WAFFLE 1 READY & WAFFLE 2 READY lights
will illuminate.
NOTE: When your Double Rotating Waffle Maker is heated for the first time, it may emit slight
odor or smoke. This is normal and should disappear after one or two uses. This does not affect
the safety of the appliance. However, as it may affect the flavor of the first waffles prepared in the
Waffle Maker, it is recommended that these be discarded.
4. Turn the browning control dial to 6 (DARK) to preheat.
5. While preheating, prepare waffle batter.
6. After approximately 5 minutes, 3 audible beeps can be heard and both white WAFFLE READY
lights illuminate, indicating both the upper and lower waffle compartments are preheated and
ready for use.
7. Turn the browning control dial down to the desired waffle browning level.
NOTE: The lowest browning settings 1 - 2 produce a lightly browned waffle, or can be used to
reheat waffles. Waffles baked at higher settings are darker and crispier. When preparing a recipe
for the first time, set the browning control between 3 and 4 (MEDIUM);
IMPORTANT: Recipes will vary in bake time and brownness; lighter batters with more sugar
will brown quicker. Note the perfect browning setting and bake times for each batter recipe for
future use.
Figure 3
5