Crux ARTISAN Serie Manual De Instrucciones página 9

Important: The juice extractor is equipped with a safety system that prevents the Extractor from
being turned on unless the unit is completely and properly assembled.
1. Assemble the juice extractor following the assembly instructions described in this manual.
2. Have all fruits and vegetables prepared for juicing.
3. To begin, plug the unit into a 120v ac electrical outlet. The LCD display will illuminate once you
turn on the unit by selecting one of the 5 speed settings.
4. Once plugged in, the juicer will verify if the safety locking bar is properly fastened and securely
locked in place. If the safety locking bar is not properly assembled, and the unit is turned on,
the LCD will display "L" to inform the user that the unit is not properly secured and locked in
place. However, if the unit is in the OFF position, and the safety locking bar is not properly
locked into place, the unit will not power on. It is important to always ensure that the safety
locking bar is properly secured and locked in place prior to juicing.
5. Remove the food pusher from the feed tube.
6. Turn the speed control dial to 5 to juice harder produce.
7. Turn the speed control dial to 1 to juice softer produce.
Note: When juicing a combination of hard and soft produce, such as beets, carrots
and strawberry, you will want to use the highest speed setting (5) for beets and carrots and the
lowest speed setting (1) for the strawberry. You do not have to turn the machine off to change
speeds. Simply turn the dial to change to the appropriate speed for each type of produce
being juiced.
Tip: To ensure maximum efficiency, alternate types of produce.
8. Once you have selected the desired speed setting for juicing and you are ready to begin
juicing, place produce into the feed tube. Use the food pusher to gently direct through the feed
tube and blade basket with the food pusher. When juicing is completed, turn the speed dial to
Power (OFF).
9. Slide the juice jug out from the juice spout. Serve juice immediately for the freshest flavor and
highest nutritional value.
10. Remove the pulp container and save or discard pulp.
Note: The pulp from your juice extractor can be used in many different applications such as
breads, muffins, cakes, soup stocks, compressed facial packs and garden compost material.
11. Unplug the juice extractor from the outlet after use.
12. Follow disassembly instructions described in this manual; all removable parts should be rinsed
and cleaned after each use. Clean the juice extractor following the procedures described in the
care & cleaning instructions.
MANUAL THERMAL PROTECTOR
This product is equipped with a Manual Resettable Thermal Protector to protect the motor. If the
motor shuts down and LCD shows "E" and "1" flashing alternatively, turn the Speed Selector Knob
to Off position, and then unplug the juice extractor. Let the unit rest for approximately half an hour.
Once the resetting period has elapsed, plug the power cord back into the outlet and turn the Speed
Selector Knob to the desired setting to continue.
DISASSEMBLY INSTRUCTIONS
Warning: Always make sure juice extractor is unplugged before starting disassembly.
1. Remove the pulp basket and juice jug.
2. Lift the safety locking bar up and off the bar locking slots on the cover.
Rest the locking bar at the front of the unit.
3. Lift juice extractor cover up and off the juice extractor.
4. Grasping the pulp spout in one hand and the back of the juice bowl in the other, loosen and lift
the juice bowl and blade basket off as one piece. These 2 parts will then easily separate for
easy cleaning.
Caution: Use care when handling the blade basket. Hold the basket's rim only. Do not touch
the cutter blades on the bottom of the basket. The cutter blades are very sharp!
5. Please follow the procedures outlined in the care & cleaning instructions for specific cleaning
instructions.
USER MAINTENANCE INSTRUCTIONS
This appliance requires little maintenance. It contains no user serviceable parts. Do not try to repair
it yourself. Any servicing that requires disassembly other than cleaning must be performed by a
qualified appliance repair technician.
7