Kichler Arkwet Weather+ Manual De Instrucciones página 11

FINISHING THE INSTALLATION
Step 1. Tuck all the connections neatly into the ceiling outlet box.
Step 2. Slide the canopy up to the mounting bracket and place one of the
key hole slots over the mounting screw on the mounting bracket. Rotate
Outlet Box
the canopy until the screw head locks in place at the narrow section of the
key hole. See figure 13.
Ceiling Mounting
Step 3. Align the remaining circular hole on the canopy with the remaining Bracket
hole on the Ceiling Mounting Bracket. Insert and tighten the mounting
screw you removed earlier and the mounting screw from Step 2 above.
Screws
Now, attach the canopy cover to the mounting screw heads by inserting
the screw heads into the bottom side of the canopy cover and rotating the
cover clockwise.
Canopy
NOTE: Adjust the canopy screws as necessary until the canopy and canopy
cover are snug. (Fig. 13)
Screws
Canopy Cover
WARNING: Make sure the "Check Tab" at the bottom of the hanger
bracket is properly seated in the "Registration Slot" on the side of the
hanger ball before attaching the canopy to the bracket.
Fig. 13
52" Arkwet Weather+ | 11
™ ™