Kichler Arkwet Weather+ Manual De Instrucciones página 8

HANGING THE FAN
(continued)
Downrod
Step 8. Slip the coupling cover, canopy cover and canopy onto the downrod.
Canopy
(Fig. 9)
Canopy Cover
Thread the hanger ball onto the downrod, insert the cross pin through the
downrod and tighten. Now tighten the set screw. (Fig. 9)
Coupling Cover
Step 9. Lift the motor assembly into position and place the hanger ball into
Set Screws
the ceiling mounting bracket.
Rotate the entire assembly until the "Check Tab" has dropped into the
"Registration Slot" and seats firmly. (Fig. 10)
Retaining
Hitch Pin
The entire motor assembly should not rotate (left or right) when seated
Clip
properly.
WARNING: Failure to reattach the cross pin and seat the "Check Tab" can
Fig. 9
cause the fan to fall from the ceiling during operation. Take special care to
make sure this pin is reattached.
Registration
Slot
Fig. 10
8 | KICHLER.COM