Kichler Arkwet Weather+ Manual De Instrucciones página 13

INSTALLING THE SWITCH HOUSING
CAUTION: To reduce the risk of electric shock, disconnect the
electrical supply circuit to the fan before installing switch housing.
Step 1. While holding the switch housing under your ceiling fan, push the
square wire connectors together. One from the fan and one from the
switch housing. (Fig.16)
NOTE: These connectors are color coded and will ONLY engage when the
colored strips are matched (aligned).
Step 2. Carefully push all the wires into the switch housing.
Mounting Plate
Square Wire
Connectors
Attach the switch housing to the mounting plate with the screws
Screws
provided. Make sure each screw is tight. (Fig. 16)
Switch Housing
Fig. 16
52" Arkwet Weather+ | 13
™ ™