Publicidad
Idiomas disponibles
Idiomas disponibles
How to use
How to use your Infiniton gas hob
The following symbols will appear on the control panel near each control knob:
Gas off / cut off gas supply to this fire
Long flame (maximum setting)
Short flame (minimum setting)
•
The minimum setting is the one at the counterclockwise end.
•
All operating positions must be selected between the maximum and minimum positions.
•
The symbol on the control panel near the control knob will indicate the operation of the burner in
question.
Automatic ignition with flame failure safety device
The product is equipped with a flame failure safety device on each burner, which is designed to stop gas
leakage.
Switching on the gas hob
1.
Press the control knob of the hob you wish to plug in and turn it anticlockwise to the maximum posi-
tion.
2. Holding down the knob will activate the automatic ignition of the hob.
3. Hold down the knob for 15 seconds after the flame appears. If after 15 seconds the burner has not ig-
nited, stop using the appliance, open the door and/or wait at least 1 minute before attempting ano-
ther ignition.
4. After this 15 second interval, to regulate the flame, you must continue to turn the knob anticlockwise
until the flame has a considerable level.
5. The operating position must be between the maximum and minimum position.
6. To turn the cooker off, turn the knob to the gas position.
7. In the event of a misfire, the burners can be properly covered with a match.
43
English
infiniton.es
Publicidad
