Safety instructions
2
Safety instructions
The manufacturer accepts no liability for damage in the following cases:
• Faulty assembly or connection
• Damage to the product resulting from mechanical influences and incorrect
connection voltage
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in the operating manual
2.1
General safety
!
WARNING!
• Only use the Frigo DC VAK for the purpose specified by the manufacturer
and do not make any alterations or structural changes to the device. The
Frigo DC VAK vehicle-specific holder is only approved for installation in the
vehicle specified in this instruction manual and in conjunction with the
Frigo DC transport refrigeration system. Installation in other vehicle types is
not permitted.
• If the Frigo DC VAK shows visible damage, it must not be mounted.
• Installation, maintenance and repair work may only be carried out by quali-
fied personnel from a specialist company who are familiar with the risks
involved and the relevant regulations.
• The electrical cooling unit is mounted in the area of the recess for the spare
tire under the vehicle. As a result, it is no longer possible to carry a spare tire.
Make sure your vehicle is equipped with an additionally available breakdown
kit.
2.2
Safety during installation
!
WARNING!
• Please note that the installation may only be carried out by persons who have
a corresponding certificate of competence, for example in accordance with
EC Regulation 307/2008, for installation and start-up of transport refrigera-
tion systems.
3
Target group for this instruction manual
This instruction manual is intended for qualified personnel at workshops who are
familiar with the guidelines and safety precautions to be applied. The qualified
personnel has a specialist qualification in refrigeration and air conditioning
equipment, which authorizes them to assemble and fill the transport refrigera-
tion system.
4
Frigo DC VAK
EN