Dreame M12 Manual Del Usuario página 8

How to Use
EN
One-Touch Self-Cleaning
* The self-cleaning function can be enabled only when the appliance is being charged and the battery level is more
than 15%.
1. After the appliance completes the cleaning task, place it back onto the base and
make sure that the water in the Clean Water Tank is sufficient for self-cleaning.
2. Briefly press the self-cleaning button
indicator will light up and the appliance will start self-cleaning.
3. After self-cleaning is complete, promptly clean the Used Water Tank. If some stains
are left on the charging base, clean the base.
11 11
on the top of the handle. The self-cleaning
How to Use
Using as a Handheld Vacuum
1. Press the handvac release button to remove the handvac.
2. Install the dust cup assembly and other attachments as shown in the diagram until
you hear a click.
3. Briefly press the handvac Power Switch
mode switch to switch between Standard mode and Turbo mode according to your
needs.
1
2
咔哒
Click
to start operating. Briefly press the handvac
咔哒
Click
EN
12 12