Bruno SRE-3000 ELAN Manual De Instalación página 28

INSTALLATION
MAKE CHARGER CONNECTIONS - FOLDING RAIL
SRE-3000 FOLDING RAIL CONFIGURATION SHOWN:
RIGHT-HAND INSTALLATION (CHARGER AT TOP)
WIRING AND CONNECTIONS CONTAINED WITHIN RAIL
BATTERY CHARGER OUTPUT CONNECTORS
CHARGE CONTACT HARNESS
(CONNECTED TO RAIL CHARGE HARNESS)
RED
RAIL CHARGE HARNESS
SOFT-STOP STRIP
CONTINUOUS CHARGE STRIP
CHARGE CONTACT ASSEMBLY
RED
SRE-3000 FOLDING RAIL CONFIGURATION SHOWN:
RIGHT-HAND INSTALLATION (CHARGER AT RAIL JOINT)
GEARBOX ASSEMBLY
RAIL CHARGE HARNESS - (LOWER CHARGE CONNECTION)
BATTERY CHARGER OUTPUT CABLE
©Bruno Independent Living Aids, Inc.
BLACK
BLACK
BATTERY CHARGER OUTPUT CABLE
RED BLACK
®
1. Connect wires from charger to charge contact
assembly. (See figures at left.)
2. Attach adhesive wire clip to rail and fold tab
over wires as shown below.
3. Plug charger into a live, properly-grounded
120V AC outlet.
4. Turn on circuit breaker.
28
SRE-3000 INSTALLATION 02-08-2019