Seek Thermal AttackPRO Manual Del Usuario página 12

Safety and usage information
NOTICE
1. Contact your dealer for servicing by authorized personnel. The
thermal imager contains no user-serviceable components.
2. As with most electronic products, this equipment must be disposed
of in an environmentally friendly way and in accordance with existing
regulations for electronic waste.
3. The thermal imager will not provide images through glass, water, or
shiny objects. These surfaces act like mirrors to the thermal imager.
4. The thermal imager will not provide thermal images underwater.
5. When using the thermal imager in a cold environment (below
0˚C/32˚F), the maximum temperature that the thermal imager can
detect is lowered, until the unit reaches an internal nominal temp of
(20˚C/68˚F). Be aware that colorization and temperature readings may
not be accurate under these conditions.
6. For best performance and accurate scene colorization, always store
the thermal imager indoors or in a room temperature environment
(20˚C/68˚F). Do not leave the thermal imager exposed to cold
environments.
7. Repeated exposure to high temperature environments without
adequate periods for the unit to self-cool may result in degradation or
loss of the thermal image or damage to the internal components. Be
sure to allow adequate cool-down periods between high temperature
exposures.