Seek Thermal AttackPRO Manual Del Usuario página 23

Quick start guide
Inserting/removing a battery
Use only batteries provided by Seek Thermal designed for the
AttackPRO product with the camera.
1. Power off the camera.
2. On the bottom of the handle, press inward on the bottom plate to
provide clearance for the latch in the next step.
3. While pressing on the bottom plate, move the latch to the rear so
that it clears the bottom plate, then release the bottom plate to open
the battery compartment. The battery (if installed) should gently eject.
4. Insert a charged battery making sure to align the rib in the battery
housing with the channel in the battery compartment.
5. Pivot the bottom plate closed, forcing the battery inward until the
latch clicks and the battery compartment is secure.
Charging a battery with the desktop charger
Use only batteries provided by Seek Thermal designed for the
AttackPRO product with the camera.
1. Remove the battery from the camera.