Seek Thermal AttackPRO Manual Del Usuario página 22

Quick start guide
8. To change temperature units between ˚C and ˚F, use a paper clip or
similar to quickly press and release the small pinhole center button.
Updating the camera
Periodically, Seek Thermal will release product improvements or
enhancement in the form of firmware updates. To update the product,
refer to the following:
1. Visit the support section at www.thermal.com/support and
download the most recent or relevant firmware update to your PC.
2. Power off the AttackPRO and remove the battery
3. Plug the included USB cable into the USB port within the handle,
the included tool maybe be used to guide the USB-C plug.
4. The AttackPRO will show up as a drive in your folder structure or
finder.
5. Drag the firmware file from the previously saved location to the
AttackPRO.
6. Eject or remove the AttackPRO as a drive from your PC, insert a
charged battery and power on the device to begin using.