Publicidad
Idiomas disponibles
Idiomas disponibles
The user of the product is always fully responsible for
observing the local safety instructions and
regulations. Observe all applicable safety instructions
and regulations.
User manual
- Everyone working on or with the product, must be familiar
with the contents of this manual and must strictly observe the
instructions therein. The management should instruct the
personnel in accordance with the manual and observe all
instructions and directions given.
- Do not change the order of the steps to perform.
- Always keep the manual with the product.
Users
- The use of this product is exclusively reserved to well
authorised, trained and qualified users. Temporary personnel
and personnel in training can only use the product under
supervision and responsibility of skilled engineers.
- Use common sense. Stay alert and keep your attention to your
work. Do not use the product when you are under the
influence of drugs, alcohol or medicine.
- The product is not to be used by children or persons with
reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given
supervision or instruction.
- Children must be supervised not to play with the product.
1
Intended use
The product has been designed exclusively for filtering, oil,
water soluble coolants, emulsions and/or oily smoke which are
released during the most common machine tool processes
Using the product for other purposes is considered contrary to
its intended use. The manufacturer accepts no liability for any
damage or injury resulting from such use. The product has been
built in accordance with state-of-the-art standards and
recognised safety regulations. Only use this product when in
technically perfect condition in accordance with its intended use
and the instructions explained in the user manual.
Technical specifications
The specifications given in this manual must not be altered.
Modifications
Modification of (parts of) the product is not allowed.
Product combinations
If the product is used in combination with other products or
machines, the safety instructions in the documentation of these
products also apply.
Use
WARNING!
Fire hazard! Do not use the product for:
- extracting and/or filtering flammable, glowing or
burning particles or solids or liquids
- extracting and/or filtering of aggressive fumes (such
as hydrochloric acid) or sharp particles
- sucking cigarettes, cigars, oiled tissues, and other
burning particles, objects, and acids
1.
"Intended use" as explained in EN-ISO 12100-1 is the use for which the technical
product is suited as specified by the manufacturer, inclusive of his directions in
the sales brochure. In case of doubt it is the use which can be deduced from the
construction, the model and the function of the technical product which is
considered normal use. Operating the machine within the limits of its intended
use also involves observing the instructions in the user manual.
2.
E.g.: CNC machining centers for cutting, boring, drilling and honing; machines
for metal forming operations like cold heading and stamping; oil mist produced
by heat and surface treatments like hardening and wet grinding.
0000101016/150119/C MistEliminator | Filter banks
WARNING!
Do not use the product for:
- oxy-fuel cutting
- aluminium laser cutting
- arc-air gouging
- paint mist
- extraction of hot gases (more than 45°C/113°F
continuously)
- grinding aluminium and magnesium
- flame spraying
- extraction of cement, saw dust, wood dust, grit etc.
- explosive environments or explosive substances/
gases
Note: this list is not all-embracing.
Installation
- The installation of this product is exclusively reserved to well
authorised, trained and qualified engineers.
- During installation, always use Personal Protective Equipment
(PPE) to avoid injury. This also applies for persons who enter
the work area during installation.
- Use sufficient climbing gear and safety guards when working
on a higher level than 2 metres (local restrictions may apply).
- Do not install the product in front of entrances and exits which
must be used for emergency services.
- If not placed on the floor, make sure the support system is
strong enough to carry the product.
- Ensure the workspace is well illuminated.
- Use common sense. Stay alert and keep your attention to your
work. Do not install the product when you are under the
influence of drugs, alcohol or medicine.
2
.
- Make sure that the workshop, in the vicinity of the product,
contains sufficient approved fire extinguishers.
Use
- Inspect the product and check it for damage. Verify the
functioning of the safety features.
- During use, always use Personal Protective Equipment (PPE)
to avoid injury. This also applies for persons who enter the
work area.
- Check the working environment. Do not allow unauthorised
persons to enter the working environment.
- Protect the product against water and humidity.
- Make sure the room is always sufficiently ventilated; this
applies especially to confined spaces.
Service, maintenance and repairs
- Obey the maintenance intervals given in this manual. Overdue
maintenance can lead to high costs for repair and revisions
and can render the guarantee null and void.
- During service, maintenance and repair jobs, always use
Personal Protective Equipment (PPE) to avoid injury. This also
applies for persons who enter the work area.
- Use sufficient climbing gear and safety guards when working
on a higher level than 2 metres (local restrictions may apply).
ATTENTION!
Service, maintenance and repairs should only be
performed in accordance with directives TRGS 560 and
TRGS 528 by authorised, qualified and trained persons
(skilled) using appropriate work practices.
WARNING!
Before carrying out service, maintenance and/or
repair jobs, fully disconnect the system from the
mains (if applicable) or turn off the connected
extraction system.
WARNING!
Do not use the machine without full filter package.
4
INSTALLATION
EN - 5
Publicidad
