Descargar Imprimir esta página

PLYMOVENT MISTELIMINATOR BANKS Manual De Instalación Y De Manejo página 8

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 37
A
Fig. 4.4: Join ring
Fig. 4.5
Apply sealing material to the join ring (A).
Fig. 4.5: Sealing material
Move the second filter bank as close as possible to the first.
If necessary, use the adjusting feet of the second filter bank
to align the inlet openings.
Place the adjusting feet of the second filter bank on a
piece of plastic to facilitate sliding.
Securely tighten both filter banks together.
Fasten the connection by tightening the bolts.
ATTENTION!
Avoid any space between the join ring and both filter
banks to ensure an oiltight connection.
Fig. 4.6: Connection of filter banks
Fig. 4.7
Mount fixing plate (A) to interconnect the top sides of the
0000101016/150119/C MistEliminator | Filter banks
filter banks.
B (x4)
Fig. 4.7: Fixing plate
Optional:
Place the selected outlet unit on the outlet connections.
Fasten it with self-tapping screws.
General:
Mount an inlet connection (ME-INL-500) on one or both sides
of the air inlet module with the supplied mounting material.
In case of one inlet connection:
Mount the inlet cover plate (ME-INL-COV) on the other side
of the air inlet module with the supplied mounting material.
In case of two inlet connections:
Connect the inlet connections to the machining device.
General:
Connect the outlet connections Ø 250 mm or the optional
side or top outlet unit to the extraction system.
4.5
OilPump (option)
To connect the oil container with electric pump, proceed as
follows.
Remove the standard oil container.
Demount the sliding bars.
Place the oil container instead of the standard one.
Create a drain by connecting an outlet hose (not included)
to another collection device.
Connect it to the mains.
One oil container with electric pump is able to serve
two air inlet modules. Use the supplied mounting
material to interconnect them. Refer to paragraph
4.5.1.
4.5.1 Oil container to serve a dual base filter bank
Refer to Fig. 4.8 for mounting of one oil container serving
two air inlet modules.
A
EN - 7

Publicidad

loading