Publicidad
Idiomas disponibles
Idiomas disponibles
Vercise™ DBS Physician Manual
Stimulation On/Off
Stimulation is turned on and off via a dedicated power switch on the Remote Control
keypad. Simply press the stimulation on/off button
Remote Control is in sleep mode – to change the stimulation status of the Stimulator.
Signal Strength
The Remote Control indicates the signal strength between itself and the Stimulator in the
upper right corner of the display:
Signal Strength
After missing a telemetry message, the Remote Control will display the "Searching"
screen. The Remote Control will then start looking for signal strength every second.
Move to a better spot and wait for the signal strength to display. To cancel searching press
.
Note: Avoid common sources of interference, such as televisions and computer monitors
when trying to use the Remote Control.
Vercise™ DBS Physician Manual
91098825-11
48 of 341
The Remote Control is achieving optimal communication with
your Stimulator.
The Remote Control is achieving good communication with your
Stimulator.
The Remote Control is achieving OK communication with your
Stimulator.
The Remote Control is achieving weak communication with your
Stimulator.
The Remote Control is achieving either very weak or no
communication with your Stimulator.
Communication between the Remote Control and the Stimulator
may or may not be achieved. To improve the communication
speed, move the Remote Control closer to the Stimulator and
position it as shown in "Remote Control Position" on page 46.
at any time – even when the
Description
Publicidad
