Publicidad
Idiomas disponibles
Idiomas disponibles
Vercise™ DBS Physician Manual
Program Selection
A stimulation program is a set of stimulation parameters that determine the patient's
therapy. A program may apply stimulation to up to four independent stimulation fields or
areas, depending on how the program is set up. For example, one area may correspond to
a right brain target, while another area may correspond to a left brain target. The Remote
Control can store up to four programs – numbered 1 through 4 – for the patient to select
and activate at any time.
Graphic
Note: If a patient tries to activate an empty program, nothing will happen.
To select a program:
P
1. Press the
button from the Level screen to go to the Program screen.
From the Program screen, each additional
number. Press
to select the previous program number. The black highlighted box
shows where you are in the cycle. Pressing
Level screen. Pressing
P
2. Press
or
to move until the program you want is highlighted.
3. Press ▲ to activate the program.
Once you have selected and activated a program, the Remote Control will return to the
Level screen.
Vercise™ DBS Physician Manual
91098825-11
50 of 341
A blank program slot.
A full program slot
The most recently activated or saved program.
The currently selected program slot
P
A reminder that the
from program 1 also returns you to the Level screen.
Description
button changes the selected program.
P
button press selects the next program
P
from program 4 returns you to the
Publicidad
