Publicidad
Idiomas disponibles
Idiomas disponibles
Built to Exceed
3 YEARS
L I M I T E D WA R R A N T Y
• Keep the tools you use out of the reach of children. Do not allow a person unfamiliar with these instruc-
tions to use the tool. Power tools are dangerous in the hands of an untrained person.
• Maintenance of power tools requires attention. Verify the alignment or the union of the moving parts,
the absence of parts and any other situation that could affect the operation of the tool.
• If the tool is damaged, have it repaired before use. Many accidents are due to lack of maintenance.
Keep cutting tools clean and sharp. Cutting tools in good condition and sharp are easier to handle and
seize less.
• Use the power tool, accessories, voltage, etc. according to these instructions and as indicated for each
type of tool.
• Always consider the working conditions and the work itself. Improper use of power tools can lead to
dangerous situations.
5.5 Service
• The service interventions in your power tool must be carried out by qualified persons who only use
identical spare parts. In this way, the safety of the power tool will be maintained.
6 SAFETY SPECIFIC RULES FOR HAMMER
ROTARY AND IMPACT DRILLING
• To protect against the risk of electric shock, injury and fire when using a power tool, it is essential to
take the following basic safety precautions. Read and write down these instructions before using the
machine.
• Check the voltage (voltage) indicated on the information plate.
• When using cable reels, unwind the reel cable entirely. Minimum conductor cross section: 1.0 mm2 •
• Make sure that you are well supported on the ladder and scaffold when drilling by free hand.
• Use a line and pipe detector to locate these on the walls with water or gas pipes and hidden power
lines. Avoid touching live components or conductors.
• Use ear mufflers to protect your ears. Hearing loss can be a gradual process!
• Do not use this tool in areas where there are flammable vapors or liquids.
• Always disconnect the plug from the power outlet before cleaning or making changes to the tool.
• Protect the power cord from damage. Oil and acid can damage the cable.
• Do not overload the machine. Sufficiently secure all parts that are working.
6
Publicidad
