Publicidad
Idiomas disponibles
Idiomas disponibles
8 USE
Important: When drilling with percussion, you would need to exert excessive pressure
applied to an unnecessary load on the engine.
Check the drill bits regularly. Re-sharpen or replace dull drill bits.
8.1 On / Off (Fig. 6)
Plug the power cord into the power outlet.
To switch the tool on, press the on / off switch (8).
Release the on / off switch to stop the tool.
If you press the lock button (9) while pressing the on / off switch, the latter will remain in the operating
position.
Release the on / off switch (8) to turn off the tool.
The stronger you press the on / off switch (8) the faster the tool will work.
To start, use lower speeds.
8.2 Forward / reverse lever
The forward / reverse lever (7) allows to define the direction of rotation of the tool. To select forward
rotation, release the on / off switch and push the forward / reverse lever to the right (R) of the tool. To
select the reverse rotation, push the lever to the left (L) of the tool.
When changing the position of the lever, make sure that the on / off switch has been released and that
the engine is stopped.
9. TECHNICAL CHARACTERISTICS
Built to Exceed
Leistung // Power
Stoßfestigkeit // Impact rate
Geschwindigkeit // Speed
Schlagenergie // Impact energy
Durchmesser // Concrete Drilling Ø
Nettogewicht // Weight
3 YEARS
800W
0 - 5.100 BPM
0 - 1.100 RPM
3.2 Joules
26 mm.
3.2 Kg
L I M I T E D WA R R A N T Y
10
Publicidad
