Publicidad
Idiomas disponibles
Idiomas disponibles
Operation (cont'd)
Signal Source Defaults
Range
mA
mV
V
T/C: J, T, E, K, N
T/C: R, S
Ω
RTD
kHz
Hz
CPM
Setting the Display Contrast
The LCD can be adjusted for best readability.
1.
Press and hold the DISPLAY/SOURCE/READ button while turning the meter on.
2.
Turn the digital pot knob until the display is most legible.
3.
Press the STORE/RESET button or wait 5 seconds for the IPM-400 to store the setting.
Turning the LCD Backlight On and Off
The IPM-400 display features a backlight to make it easier to read in dim lighting. To extend
the life of the batteries, turn the backlight off when it is not needed.
1.
Turn the meter on and wait for the normal display to appear.
2.
Press and hold the DISPLAY/SOURCE/READ button for 3 seconds and then release.
3.
To turn the backlight off, repeat step 2.
All manuals and user guides at all-guides.com
LO
4.00
1.00
1.00
All points 538 °C (1000 °F)
100.0
1.00
100
100
SET
12.00
5.00
5.00
All points 0 °C (32 °F)
200.0
All points 0 °C (32 °F)
5.00
500
500
IPM-400
HI
20.00
10.00
10.00
400.0
10.00
1000
1000
11
Publicidad
