Publicidad
Idiomas disponibles
Idiomas disponibles
Using the IPM-400 as a Source
Select the Source mode by pressing the DISPLAY/SOURCE/READ button until "SOURCE"
appears on the display. Pressing the button two more times displays both "SOURCE" and
"READ". This applies to specific functions.
Using SOURCE Outputs
Outputs are adjustable with the digital pot. When you need to adjust the output, flip the toggle
switch to SET and turn the digital pot. To use stored values, flip the switch to HI or LO.
Storing Output Values
Output values can be stored into memory where they remain for later use or until you reset the
meter to the defaults. You can also move values from SET into HI or LO.
1.
Press the DISPLAY/SOURCE/READ button until "SOURCE" appears on the display.
2.
Flip the toggle switch to HI or LO.
3.
To change the output value, turn the digital pot.
4.
Press the STORE/RESET button to store the value.
5.
To transfer the value in SET to HI or LO, press and hold STORE/RESET while moving the
switch to HI or LO. The display flashes once and the unit beeps once.
6.
Release STORE/RESET.
7.
To use a stored value, flip the toggle switch to HI or LO.
All manuals and user guides at all-guides.com
IPM-400
13
Publicidad
