Publicidad
Idiomas disponibles
Idiomas disponibles
CHAPTER -1: SAFETY INSTRUCTIONS
If your refrigerator has a fan condenser:
• The condenser of your fridge is placed at the bottom
of cabinet. As a result of that, assemble the spacer
by fixing it to holes on the cover bottom panel and
turn 90° that's shown below figure for arranging the
distance between the refrigera¬tor and the back
wall at where you place the fridge. You can move
the fridge towards the back wall until that point.
• Refrigerator should be placed against a wall with a
free distance not exceeding 75 mm.
Before Using your Fridge Freezer
• Before setting up your fridge freezer, check for any visible damage. Do not install or use your fridge freezer
if it is damaged
• When using your fridge freezer for the first time, keep it in an upright position for at least 3 hours before
plugging into the mains. This will allow efficient operation and prevents damage to the compressor.
• You may notice a light odour when using your fridge freezer for the first time. This is perfectly normal and
will fade away as the fridge starts to cool.
NO FROST technology
Differs from many other standard fridge freezers. Other appliances may experience ice in the
freezer compartment due to the opening of the doors and humidity caused by the food. In
such appliances defrosting is required. They have to be turned off periodically, the food inside
moved and the ice removed.
Your "no frost" fridge freezer prevents such problems by evenly distributing in the fridge and
freezer compartments through the use of a fan. This cools your food evenly and uniformly,
preventing humidity and freezing.
Plastic for distance setting
Blue arrows: Blow cold air
Red arrows: Returning hot air
EN -5-
Publicidad
