Publicidad
Idiomas disponibles
Idiomas disponibles
PLAYBACK PATTERN (SEQUENCER)
- Refer to the "SETTING TEMPO" section to set the tempo value, then press PLAY/STOP to start
playback and the PLAY/STOP button indicator will light up.
- The sequencer will play each step of the pattern in turn, and when it reaches the last step it will return
to the first step and continue playing.
- The step LED corresponding to the step currently being played will flash. If you want to stop
playback, simply press the PLAY/STOP button once.
The following operations on the sequencer can be performed during the sequencer playback.
- During sequencer playback, you can press any button on the keyboard to achieve
sequencer live transpose, and the corresponding button indicator will light up to
indicate the current transpose position.
Transpose's central reference button is the C button in the middle of the keyboard,
Live
so the sequencer's live transpose range is -12 to +12.
transpose
Note:
* If the note transpose after the current playback step is out of range of the local CV
output, it will be muted.
* If the pattern saving operation is not performed, live transpose will not be saved.
- Press and hold the HOLD button and the sequencer will keep playing the current
Hold
step repeatly until the HOLD button is released.
- Press and hold the ACCENT button to automatically add an accent effect at each
step of playback.
Live accent
- After releasing the ACCENT button, live accent turns off.
Note: Live accent will not be saved.
- Press and hold the SLIDE button to turn on slide function at each step of playback.
Live slide
- After releasing the SLIDE button, the live slide turns off.
Note: Live slide will not be saved.
- Press and hold the RATCHET button to activate the Live ratchet. You can press ▲
or ▼ to adjust the ratchet value and the sequencer will apply the ratchet value to
each step.
Live ratchet
- After releasing the RATCHET button, the live ratchet turns off.
Note: Live ratchet will not be saved.
- Press and hold the GATE LENGTH button to activate the Live gate length. You can
press ▲ or ▼ to adjust the gate length value and the sequencer will apply the gate
Live gate
length value to each step.
length
- After releasing the GATE LENGTH button, live gate length turns off.
Note: Live ratchet will not be saved.
- Press and hold the CLEAR/REST button will temporarily mute the sequencer output.
Live mute
- After releasing the CLEAR/REST button, live mute turns off.
(rest)
Note: Live mute will not be saved.
08
Publicidad
