Publicidad
Idiomas disponibles
Idiomas disponibles
SYNC RATE
- When in SYNC IN, this setting determines how much the sequencer or arpeggiator advances when
the pulse signal is received.
- When in SYNC OUT, this setting determines how much of the sequencer or arpeggiator is advanced
before outputting the pulse signal.
- This setting can be changed on the APP.
SYNC IN
1PPS – Play 1 step per pulse.
2PPQ - Play 1/4 note every 2 pulses (KORG mode).
24PPQ - Play 1/4 note every 24 pulses.
48PPQ - Play 1/4 note every 48 pulses.
SYNC OUT
1PPS – Output 1 pulse per step.
2PPQ - Output 2 pulses per 1/4 note (KORG mode).
24PPQ - Output 24 pulses per 1/4 note.
48PPQ - Output 48 pulses per 1/4 note.
POWER ON COMMANDS
Pressing specific buttons before booting the device can change the MIDI channel, clock source,
multi-trigger, button priority and other parameters. The following is a detailed description:
MIDI channel
1
Clock source
2
C#2 D#2
B1
C2 D2 E2
F2
1
2
3
4
5
Press and hold any of the step buttons from 1 to 16 to boot and set the MIDI
channel value 1 to 16:
Note: This will change both the MIDI input and MIDI output channels.
C#2 D#2
B1
C2 D2 E2
F2
1
2
3
4
5
Press and hold any of C#2, D#2, C#3, D#3 to boot to set the synchronized
clock source corresponding to:
C#2 -- Internal
F#2 G#2 A#2
C#3 D#3
G2 A2
B2
C3 D3 E3
6
7
8
9
F#2 G#2 A#2
C#3 D#3
G2 A2
B2
C3 D3 E3
6
7
8
9
D#2 - DIN
C#3 -- USB
13
F#3 G#3 A#3
F3
G3 A3
10
11
12
13
14 15
F#3 G#3 A#3
F3
G3 A3
10
11
12
13
14 15
D#3 - TRG
B3
C4
16
B3
C4
16
Publicidad
