Cameo S2 IP Manual De Usuario página 18

STANDALONE OPERATING MODE HSI (Hue - Saturation - Intensity)
Starting from the main display, press the left-hand rotary-push encoder to access the menu for
selecting the operating mode. Turn the left encoder (SELECT) to select HSI (note the selection ar-
row on the left) and confirm by pressing the left encoder (ENTER). You can now set the brightness
(DIM), hue (HUE) and saturation (SAT) by turning the three rotary-push encoders (see illustration).
Turn encoder =
Set brightness (DIM)
Press encoder =
Selection of the operating mode
STANDALONE OPERATING MODE DIRECT LED (RGBW colour mixing)
Starting from the main display, press the left-hand rotary-push encoder to access the menu
for selecting the operating mode. Turn the left encoder (SELECT) to select Direct LED (note the
selection arrow on the left) and confirm by pressing the left encoder (ENTER). Now set the total
brightness (DIM) and the intensity of R, G, B and W using the three rotary-push encoders (see
illustration).
Turn encoder =
Set overall brightness (DIM)
Press encoder =
Selection of the operating mode
STANDALONE OPERATING TYPE COLOURCOORDINATES
Starting from the main display, press the left-hand rotary-push encoder to access the menu for
selecting the operating mode. Turn the left encoder (SELECT) to select Colour Coordinates (note
the selection arrow on the left) and confirm by pressing the left encoder (ENTER). You now set
the overall brightness (DIM) and the x and y coordinates with the help of the three rotary-push
encoders (see illustration).
18
Turn encoder =
Set saturation (SAT)
Press encoder =
Open main menu (Menu)
Turn encoder =
Setting the colour tone (HUE)
Turn encoder =
Set the brightness of G or W
Press encoder =
Open main menu (Menu)
Turn encoder =
Set the brightness of R or B
Press encoder =
switch between R+G and B+W (Next Colours)