Cameo S2 IP Manual De Usuario página 29

Use the 28 mm TV spigot previously mounted on the U-bracket for tripod mounting (Fig. A). Use
a suitable tripod and follow the manufacturer's instructions (maximum load, vertical installation
on a flat surface, etc.). To adjust the direction of radiation on a vertical plane, loosen the clamping
levers mounted on the U-bracket slightly (Fig. B), set the desired direction of radiation and tighten
the clamping levers again.
B
USING TV SPIGOTS FOR TRUSS MOUNTING
HAZARD Overhead mounting requires extensive experience, including the calculation
of the load limit values of the installation material and regular safety inspection of all
installation materials and spotlights. If you do not have these qualifications, do not
attempt to perform an installation yourself. Refer instead to a qualified professional.
There is a risk that devices that are incorrectly mounted and secured may come loose
and fall down. This can cause serious injury or death.
A
B
29