Cameo S2 IP Manual De Usuario página 32

Now insert the diffuser disc from above into the rear, wide grooves of the installation compart-
ment (Fig. C and detailed view).
Now fold the cover rail back down to close the installation compartment (Fig. D). Afterwards, the
two locking levers must be pushed back towards the edge of the housing. During the procedure,
make sure that the levers snap back into place correctly and that the diffuser disc is secured
against falling out.
NOTES: A diffuser disc (or the Intensifier, optionally available) can also be installed in
combination with one of the optionally available straightening grids and the Dark Fil-
ter, also optionally available (straightening grid + Dark Filter: narrow groove, diffuser
discs + Intensifier: wide groove). The optionally available wing limiter can additionally
32
be mounted on the headlamp.
C
D