Cameo S2 IP Manual De Usuario página 25

Off
=
Dim to Warm Colour drift is enabled
650Hz,
1530Hz,
LED PWM 3600Hz,
=
frequency 12kHz,
18.9kHz,
25kHz
RAW
User
Calibration
=
Factory
Calibration
Smart
Calibration
Automatic
On
= locking of the
controls
Off
Colour drift is disabled
Select LED PWM frequency
R, G, B and W with maximum value 255
Individual colour calibration. Cross-mode brightness
setting of R, G, B, A and L with values from 000 - 255.
Set R and G with the middle and right encoder, then
press the middle encoder (Next Colours) and set B and
W again with the middle and right encoder.
Factory calibration of R, G, B and W
Merging factory and RAW calibration
Automatic locking of the controls after approximately
1 minute of inactivity. Display after operating attempt:
"Locked!"Unlocking: Simultaneously press the middle
and right encoder for approx. 5 seconds
Automatic locking of the controls is disabled
25