Cameo S2 IP Manual De Usuario página 19

Turn encoder =
Set overall brightness (DIM)
Press encoder =
Selection of the operating mode
STANDALONE MODE COLOUR PRESETS (GEL)
Starting from the main display, press the left-hand rotary-push encoder to access the menu for
selecting the operating mode. Turn the left encoder (SELECT) to select GEL (note the selection
arrow on the left) and confirm by pressing the left encoder (ENTER). Now set the overall bright-
ness (DIM) using the left encoder and select one of the available Lee-Filter colour presets (Dark
Magenta to Rose Pink) using the middle rotary-push encoder (see illustration).
Turn encoder =
Set overall brightness (DIM)
Press encoder =
Selection of the operating mode
STANDALONE OPERATING MODE USER COLOURS (User Colour)
Starting from the main display, press the left-hand rotary-push encoder to access the menu
for selecting the operating mode. Turn the left encoder (SELECT) to select User Colour (note
the selection arrow on the left) and confirm by pressing the left encoder (ENTER). Now set the
brightness (DIM) using the left encoder and select one of the eight user colours (USER_COLOUR_1
to USER_COLOUR_8) using the middle rotary-push encoder (see illustration). The user colours can
be edited individually (Main Menu -> Edit User Colour).
Turn encoder =
Set digit 3 and 4 after the decimal point
Press encoder =
Open main menu (Menu)
Turn encoder =
Set digit 1 and 2 after the decimal point
Press encoder =
switch between x and y (Next Coordinate)
Turn encoder =
Select colour preset
Press encoder =
Open main menu (Menu)
19