Ribind UP 2.0 Manual De Instrucciones página 51

TEST REPORT
Tick the box corresponding to the intervention carried out: C = Conforming, NC = Non-conforming, NA = Not applicable.
Phase
1 Check the existing structure and automation fastening
2 Check the correct fastening of the doors to the carriages of the automation and adjustment
3 Check that the carriages cannot exit the sliding guiding device
4 Check the belt tension
5 Check the mechanical limit switches and the fastening of all the screws
6 Check the floor guiding device
7 Check that the passage compartment complies with contractual data
8 Check the distance between the door and the floor
9 Check the safety distance during the opening
10 Manually check that the doors slide freely without friction
11 Check the electrical connections of the devices installed
12 Check the detection area of the opening and safety sensors
13 Check the additional opening commands (buttons, contacts with key, etc.)
14 Check the functions selector
15 Check operation with the battery
16 Check the manual locking and unlocking device function
17 Check the opening and closing speed
18 Declaration of Conformity delivered to the owner
19 Use and Maintenance Manual delivered to the owner
20 Maintenance Register delivered to the owner
___________________________ _________________________________________________________________
Date Technician's signature
Description
23
C
___________________________________________________________________
Owner's signature
G
B
NC NA