1
General information
1.1
About these instructions
2
Safety
2.1
Symbols
Installation and operating instructions • Medana PE3 • Ed.02/2023-04
These installation and operating instructions are an integral part of the device. Read these
instructions before commencing work and keep them in an accessible place at all times.
Strict adherence to these instructions is a requirement for intended use and correctly oper-
ating the device. All specifications and markings on the device must be observed. These in-
stallation and operating instructions correspond to the relevant version of the device and
the underlying safety standards that apply at the time of going to print.
The language of the original operating instructions is English. All other languages of these
instructions are translations of the original operating instructions.
This chapter contains essential instructions that must be followed
during the different phases of the pump's service life. Non-ob-
servance of these instructions may constitute a danger to per-
sons, the environment and the product, and may invalidate the
warranty. Non-observance may lead to the following hazards:
•
Injuries due to electrical, mechanical and bacteriological factors
and electromagnetic fields.
•
Damage to the environment due to leakage of hazardous ma-
terials.
•
Damage to the installation.
•
Failure of important product functions.
Also comply with the indications and safety instructions in
other chapters!
Symbols:
WARNING
General safety symbol
WARNING
Electrical risks
NOTICE
Notes
Signal words
DANGER
Imminent danger.
May result in death or severe injuries if the hazard is not prevented.
WARNING
Non-observance may result in (very) severe injury.
en
7