Publicidad
Idiomas disponibles
Idiomas disponibles
2.6
Unauthorised modifica-
tion of components and
use of unauthorised
spare parts
2.7
Improper use
3
Transport and interim storage
4
Application
5
Product information
5.1
Technical data
Installation and operating instructions • Medana PE3 • Ed.02/2023-04
only be carried out when at a standstill. The procedures described
in the installation and operating instructions for deactivating the
product/installation must always be complied with.
Immediately on conclusion of the work, all safety and protective
devices must be put back in position and recommissioned.
Unauthorised modification of components and use of unauthor-
ised spare parts will impair the safety of the product/personnel,
and will render the manufacturer's declarations regarding safety
void. Modifications to the product are only permissible following
consultation with the manufacturer.
Original spare parts and accessories authorised by the manufac-
turer ensure safety. The use of other parts absolves the manufac-
turing company of any and all liability.
The operational reliability of the supplied product is only guaran-
teed for conventional use in accordance with Chapter 4 of the In-
stallation and operating instructions. The limit values must on no
account fall below or exceed the values specified in the cata-
logue/data sheet.
When receiving the product, check that it has not been damaged during transport. If any
damage is found, take all necessary measures with the carrier in the time provided.
WARNING
The storage environment may cause damage to the product
If the delivered material is to be installed at a later date, store it in a dry
place and protect it from impacts and any external influences (humidity,
frost etc.). Temperature range for transport and storage: -30 °C to
+60 °C.
Handle the product with care so as not to damage it prior to installation.
These devices are domestic pressure boosting systems designed for clean water. The
downward type is designed for boosting water from roof-top water tank to lower floors us-
ing water and the upward type is designed for boosting water from tank on the ground to
upper floors.
DANGER
Risk of explosion!
Do not use this pump to convey flammable or explosive liquids.
Medana PE3-350EA
Hydraulic data
Maximum operating pressure
Maximum suction pressure
5
1.8 bar (1.8 x 10
Pa)
5
Mode 1: 0.8 bar (0.8 x 10
Pa)
5
Mode 2: 1.3 bar (1.3 x 10
Pa)
en
9
Publicidad
