Publicidad
FIG.1
a.
Set the Foot End Cap(#10) to the end of parts(#2,#3).
b. Attach the part(#2,#3) to the part(#1) using (4)Square Neck Bolts(#20).
c.
Insert the 38*38 Plug(#12) and the 38*38 End Cap(#25) to the part(#1).
FIG.2
a.
Insert the 40*20 Plug(#13) into the end of parts(#5,#8). Insert the Round Plug(#11) into the end of
parts(#4,#9).
b. Attach the part(#5,#8,#24) to the part(#1) using (1)M12*190 Hex Bolt(#23).
c.
Attach the part(#4) to the part(#5) using (1)M12*190 Hex Bolt(#23).
d. Attach the part(#9) to the part(#8) using (1)M12*150 Hex Bolt(#22).
FYTTER |WWW.FYTTER.COM
PAG- 12
Publicidad
