Publicidad
Idiomas disponibles
Idiomas disponibles
Introduction for buttons on remote controller
Note:
This is a general use remote controller, it could be used for the air conditioners
●
with multifunction; For some function, which the model doesn't have, if press the
corresponding button on the remote controller that the unit will keep the original
running status.
● After putting through the power, the air conditioner will give out a sound.
Operation indictor "
conditioner by using remote controller.
● Under on status, pressing the button on the remote controller, the signal icon "
on the display of remote controller will blink once and the air conditioner will give
out a "de" sound, which means the signal has been sent to the air conditioner.
● Under ff status, set temperature and clock icon will be displayed on the display
of remote controller (If timer on, timer off and light functions are set, the corre-
sponding icons will be displayed on the display of remote controller at the same
time); Under on status, the display will show the corresponding set function icons.
1
ON/OFF button
Press this button can turn on or turn off the air conditioner. After turning on the unit,
operation indicator "
ent for different models) and the unit gives out a sound.
2
MODE button
Press this button can select your required operation mode.
● After selecting auto mode, air conditioner will operate automatically according to
ambient temperature. Set temperature can't be adjusted and also can't be displa-
yed. Press "FAN" button can adjust fan speed.
● After selecting cool mode, air conditioner operates under cool mode. Cool indicator
"
" on the unit is ON. You can press "+" or "-" button to adjust set temperature.
Press "FAN" button can adjust fan speed.
●
After selecting dry mode, air conditione r operates under dry mode at low speed.
Dry indicator "
● After selecting fan mode, air conditioner operates only under fan mode, All mode
indicators on the unit is OFF. Operation indicator is ON. Press "FAN" button can
adjust fan speed.
● After selecting heat mode, air conditioner operates under heat mode. Heat indicator
"
" on the unit is ON. You can press "+" or "-" button to adjust set temperature.
Press "FAN" button to adjust fan speed.
Cool&Heat Unit only
" is ON (red indicator). After that, you can operate the air
" on the unit is ON (green indicator. Color may be differ-
AUTO
COOL
" on the unit is ON. Under dry mode, fan speed can't be adjusted.
DRY
FAN
90
HEAT
"
Publicidad
