KitchenAid KG25H0XMC Instrucciones Y Recetas página 16

All manuals and user guides at all-guides.com
ASSEMBLING YOUR BOWL - LIFT
Attaching the Flat Beater,
Wire Whip, and PowerKnead™
Spiral Dough Hook
1. Make sure the speed control
lever is set to the OFF/0 position.
2. Unplug the stand mixer or
disconnect power.
3. Slide selected accessory onto
the beater shaft.
..4. Turn the accessory to the right,
hooking it over the pin on the
shaft.
5. Plug into a grounded
3-prong outlet.
STAND MIXER
Removing the Flat Beater,
Wire Whip, and PowerKnead™
Spiral Dough Hook
1. Make sure the speed control
lever is set to the OFF/0 position.
2. Unplug the stand mixer or
disconnect power.
3. Press accessory upward and turn
to the left.
4. To remove, gently slide the
accessory down from the
beater shaft.
Beater
Shaft
16
16 16 16
16